Rollers mounting

Mounting roller hangers and accessories for rolling wire.

Mounting clips and accessories for rolling wire used for wiring a certain range of diameters and should make the transition through the pulley wire mounted with a connection or repair clamp.

Mounting clips for rolling a single wire.

Lightning protection wires and cables, which are assessed on the power lines, can be mounted using mounting style roller M1R are made through the use of aluminum alloys and easy to operate.

М1R-5	М1R-8	Mounting clip M1P-8 is used to lift heavy insulation hangers.
М1R-6	М1R-9	Mounting clip M1R-9 is used for the installation of heavy wire on transmission lines and large river crossings and other obstacles, allows pulling wires successively pass the wire rope and rigging together with the connecting terminal.
М1R-7	М1R-10	M1R10 mounting clip used for mounting heavy wire diameter 37,5-46,5 mm. on transmission lines and transitions through large rivers and other obstacles, allows pulling wires successively pass the wire rope and rigging together with the connecting terminal.

Mark roller	For wires d, mm	Failure load, kN, not less	Weight, кg
М1R-5	8,4-13,5	6,25	6,14
М1R-6	15,2-21,6	10,0	8,00
М1R-7	22,4-33,2	37,5	16,00
М1R-8	to 37,0	100,0	8,40
М1R-9		125,0	10,00
М1R-10	37,5-46,5	250,0	41,00

For a larger image, please click on the image twice