RU EN
%D, %d %M %y
Time: %h~:~%m
Navigation:
News
Weather
GISMETEO: Weather Slavyansk
Exchange rates
Exchange rates in Ukraine

Home page  / Product Catalogue / Linear fitting to the lines of electric transmission / Ears

Ears


Ears(lugs) are designed to connect the rod suspension( hangers ) insulator, or other linear earrings ( lugging ) with steel reinforcement (fixtures ). Spherical socket swivel lugs in accordance with GOST 27396-93 is performed. The coupled time action ( dimensions ) lugs must comply with the requirements of GOST 11359-75. Eyelets (junction socket hole (lug) ) for air overhead line of electricity transmission give issued the following types:

U – ears (lugs) shortened
U1 – oneclawed (onearme) (valved) (junction socket (hole) lug) ears;
U1K –oneclawed (valved) (junction socket (hole) lug)  ears cropped;
U2 – doubledclawed (valved) ( junction socket (hole) lug) ears;
U2K – doubledclawed (valved) (junction socket (hole) lug) ears cropped;
US - ears (lugs) with a special curved finger(pin);
USK - ears shortened with a special bent finger(pin). 

For locking the rod bushing and pestle in a nest earrings ears (lugs)supplied with W-shaped locks. Ears correspond TUU 3400130441.006-95

Ear type U

Ear type U1 (U1-7/12-16)

У
 
У1 
Ears cropped type U intended to support the acquisition of short suspension lines 330 and 500 kV without protective rings.
Ear type
Dimensions, mm
Failure load, kN, not less
Weight, kg
D
А
А1
Н
U-7-16
20
38
19,2
42
70
1,05
U-12-16
20
32
19,2
42
120
1,3
U-16-20
28
47
23
48
160
2,3
U-21-20
28
47
23
48
210
2,66
U-30-24
36
47
27,5
67
300
5,74
Ears U1 designed to connect the rod suspension insulators or earrings with another linear valves.
Ear type
Dimensions, mm
Failure load, kN, not less
Weight, kg
D
b
В1
 В2 
 D1
Н
H1
U1-7-16
17
16
52
58
19,2
96,5
123
70
0,67
U1-12-16
23
22
56
62
19,2
102,5
140
120
1,05

Ear type U1 (U1-16/21-20, U1-30-24, U1-40-28)

Ear type U1 and U1К (U1-4-11, U1К-7-16)

У1-16  У1К 
Ears are designed to connect the rod suspension insulators or earrings with another linear valves.
Ear type
Dimensions, mm
Failure load, kN, not less
Weight, kg
D
b
В1
B2
D1
H
Н1
U1-16-20
26
25
66
75
23
114
152
160
1,6
U1-21-20
29
28
72
78
23
131
173
210
2,24
U1-30-24
38
36
94
94
27,5
150
205,5
300
5,04
U1-40-28
42
40
112
112
32
190
225
400
8,15
Ears types U1 and U1K designed to connect the rod suspension insulators or earrings with another linear valves
.
Ear type
Dimensions, mm
Failure load, kN, not less
Weight, kg
D
b
B1
B2
D1
H
 H1
U1-4-11
15
14
38
40
12,5
80,5
90
40
0,53
U1К-7-16
17
16
52
58
19,2
77
104,5
70
0,62


Ear type U1-4/7-11/16 Ear type U-40
У1-4   
Ear transition designed to connect the rod suspension insulators or earrings with another linear valves.
Failure load- 40 кN.
Weight - 0,29 кg.

Ears are designed to connect suspended prison or earrings with another linear valves. Jack swivel lugs for connection rod runs and earrings.
Mating dimensions eyes meet the requirements of GOST 11359-75.

Failure load - 35 кN. 
Weight -0,15 кg.



 Ear type U2-7-16, U2-12-16

 Ear type U2 (U2-16-20, U2-21-20, U2-30-24)

 

 У2-16

 Ears are designed to connect the rod suspension insulators or earrings with another linear valves.

Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
В
В2
D1
H
Н1
U2-7-16
16
17
58
19,2
93,5
123
160
2,17
U2-12-16
22
23
62
19,2
102,5
140
120
1,52

 Ears are designed to connect the rod suspension insulators or earrings with another linear valves.

Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
В
В2
D1
H
Н1
U2-16-20
25
26
75
23
114
152
160
2,17
U2-21-20
28
29
78
23
131
174
210
3,56
U2-30-24
36
38
94
27,5
150
205,5
300
6,43


Ear type U2К-7-16 Ear type US
У2К УС
Ears are designed to connect the rod suspension insulators or earrings with another linear valves.

Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
В
В2
D1
H
H1
U2К-7-16
16
17
58
19,2
77
105
70
0,75
Ears are specially designed for the connection of the rod suspension insulators or earrings with another linear valves.
Lugs provide swivel chain-type staple SC or arch supports suspension clamp.
Ears are on the middle edge fixing lugs shielding and discharge horn.

Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
d1
D1
B1
В2
H
H1
US-7-16
18
25
19,2
110
58
104
131
70
1,25
US-12-16
25
25
19,2
122
60
113
151
120
2



Ear type US Ear type USK
УС-1 УСК
Ears are specially designed for the connection of the rod suspension insulators or earrings with another linear valves.
Ears are bent finger, thus providing swivel chain-type staple SK or arch supports suspension clamp. Ears are on the middle edge holes for protective screens and discharge horn.

 Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
d1
D1
B1
B2
Н
H1
US-16-20
28
35
23
146
72
132
172
160
2,9
US-21-20
28
35
23
168
79
145
185
210
4,71
US-30-24
36
35
27,5
198
94
164
215
300
7,5
US-40-28
42
40
32
228
112
200
255
400
12,5

Special cropped ears are designed to connect the rod suspension insulators or earrings with another linear valves.
Ears are bent finger, thus providing swivel chain-type staple SK or arch supports suspension clamp. USK ears are not designed to mount them shielding and discharge horn.

Ear type
Dimensions, mm
Failure load, kN, not less
Weight, кg
d
d1
D
В1
B2
Н
H1
USK-7-16
18
25
19,2
110
52
67
95
70
1,2
USK-12-16
25
32
19,2
125
60
78
112
120
2,1
USK-16-20
28
35
23
142
70
90
130
160
3,3
USK-21-20
28
35
23
163
79
90
125
210
4,17
USK-30-24
36
35
27,5
198
94
100
150
300
7,4
USK-40-28
42
40
32
228
112
127
179
400
11,3